eBook downloads, eBook resources & eBook authors
This book describes the concepts and methods of a discipline called design assurance, and reveals many nontechnical aspects that are necessary for getting the work done in an engineering department. It is helpful to engineers and their managers in understanding and using design assurance techniques.
Written by a Federal Aviation Administration (FAA) consultant designated engineering representative (DER) and an electronics hardware design engineer who together taught the DO-254 class at the Radio Technical Commission for Aeronautics, Inc. (RTCA) in Washington, District of Columbia, USA, Airborne Electronic Hardware Design Assurance: A Practitioner's Guide to RTCA/DO-254 is a testimony to the lessons learned and wisdom gained from many years of first-hand experience in the design, verification, and approval of airborne electronic hardware. This practical guide to the use of RTCA/DO-254 in the development of airborne electronic hardware for safety critical airborne applications: Describes how to optimize engineering processes and practices to harmonize with DO-254 Addresses the single most problematic aspect of engineering and compliance to DO-254—poorly written requirements Includes a tutorial on how to write requirements that will minimize the cost and effort of electronic design and verification Discusses the common pitfalls encountered by practitioners of DO-254, along with how those pitfalls occur and what can be done about them Settles the ongoing debate and misconceptions about the true definition of a derived requirement Promotes embracing DO-254 as the best means to achieve compliance to it, as well as the best path to high-quality electronic hardware Airborne Electronic Hardware Design Assurance: A Practitioner's Guide to RTCA/DO-254 offers real-world insight into RTCA/DO-254 and how its objectives can be satisfied. It provides engineers with valuable information that can be applied to any project to make compliance to DO-254 as easy and problem-free as possible.
A unique, design-based approach to reliabilityengineering Design for Reliability provides engineers and managerswith a range of tools and techniques for incorporating reliabilityinto the design process for complex systems. It clearly explainshow to design for zero failure of critical system functions,leading to enormous savings in product life-cycle costs and adramatic improvement in the ability to compete in globalmarkets. Readers will find a wealth of design practices not covered intypical engineering books, allowing them to think outside the boxwhen developing reliability requirements. They will learn toaddress high failure rates associated with systems that are notproperly designed for reliability, avoiding expensive andtime-consuming engineering changes, such as excessive testing,repairs, maintenance, inspection, and logistics. Special features of this book include: A unified approach that integrates ideas from computer scienceand reliability engineering Techniques applicable to reliability as well as safety,maintainability, system integration, and logistic engineering Chapters on design for extreme environments, developingreliable software, design for trustworthiness, and HALT influenceon design Design for Reliability is a must-have guide for engineersand managers in R&D, product development, reliabilityengineering, product safety, and quality assurance, as well asanyone who needs to deliver high product performance at a lowercost while minimizing system failure.
Features include: jargon-free language with well-tried, real-world examples; useful tips for managers at the end of each chapter; a comprehensive bibliography at the end of the book. It is also highly informative for graduate and undergraduate engineering students and ideally suited for establishing a web-based design management system for geographically dispersed teams. Changes in the second edition: New case studies. Expanded text in each chapter (about 50 new pages worth) including a wholly new chapter on the analysis of the design process as a whole.
A one-stop reference guide to design for safety principles and applications Design for Safety (DfSa) provides design engineers and engineering managers with a range of tools and techniques for incorporating safety into the design process for complex systems. It explains how to design for maximum safe conditions and minimum risk of accidents. The book covers safety design practices, which will result in improved safety, fewer accidents, and substantial savings in life cycle costs for producers and users. Readers who apply DfSa principles can expect to have a dramatic improvement in the ability to compete in global markets. They will also find a wealth of design practices not covered in typical engineering books—allowing them to think outside the box when developing safety requirements. Design Safety is already a high demand field due to its importance to system design and will be even more vital for engineers in multiple design disciplines as more systems become increasingly complex and liabilities increase. Therefore, risk mitigation methods to design systems with safety features are becoming more important. Designing systems for safety has been a high priority for many safety-critical systems—especially in the aerospace and military industries. However, with the expansion of technological innovations into other market places, industries that had not previously considered safety design requirements are now using the technology in applications. Design for Safety: Covers trending topics and the latest technologies Provides ten paradigms for managing and designing systems for safety and uses them as guiding themes throughout the book Logically defines the parameters and concepts, sets the safety program and requirements, covers basic methodologies, investigates lessons from history, and addresses specialty topics within the topic of Design for Safety (DfSa) Supplements other books in the series on Quality and Reliability Engineering Design for Safety is an ideal book for new and experienced engineers and managers who are involved with design, testing, and maintenance of safety critical applications. It is also helpful for advanced undergraduate and postgraduate students in engineering. Design for Safety is the second in a series of “Design for” books. Design for Reliability was the first in the series with more planned for the future.
Due to global competition, safety regulations, and other factors, manufacturers are increasingly pressed to create products that are safe, highly reliable, and of high quality. Engineers and quality assurance professionals need a cross-disciplinary understanding of these topics in order to ensure high standards in the design and manufacturing proce
Software Quality Assurance in Large Scale and Complex Software-intensive Systems presents novel and high-quality research related approaches that relate the quality of software architecture to system requirements, system architecture and enterprise-architecture, or software testing. Modern software has become complex and adaptable due to the emergence of globalization and new software technologies, devices and networks. These changes challenge both traditional software quality assurance techniques and software engineers to ensure software quality when building today (and tomorrow’s) adaptive, context-sensitive, and highly diverse applications. This edited volume presents state of the art techniques, methodologies, tools, best practices and guidelines for software quality assurance and offers guidance for future software engineering research and practice. Each contributed chapter considers the practical application of the topic through case studies, experiments, empirical validation, or systematic comparisons with other approaches already in practice. Topics of interest include, but are not limited, to: quality attributes of system/software architectures; aligning enterprise, system, and software architecture from the point of view of total quality; design decisions and their influence on the quality of system/software architecture; methods and processes for evaluating architecture quality; quality assessment of legacy systems and third party applications; lessons learned and empirical validation of theories and frameworks on architectural quality; empirical validation and testing for assessing architecture quality. Focused on quality assurance at all levels of software design and development Covers domain-specific software quality assurance issues e.g. for cloud, mobile, security, context-sensitive, mash-up and autonomic systems Explains likely trade-offs from design decisions in the context of complex software system engineering and quality assurance Includes practical case studies of software quality assurance for complex, adaptive and context-critical systems
In The Business of Engineering, consulting engineer Matthew Loos describes the unique parallels between business and engineering strategies. Loos, an engineering leader in a fast-paced industry, explains how the strategies utilized by both titans of business and engineering greats are not all that different. Using stories, humor, and dozens of practical tips, he provides an avenue through which engineering professionals and entrepreneurs can learn valuable techniques from these seemingly different professions. In this book you'll discover: How engineers can utilize business techniques to increase their career potential Ways to analyze business problems like an engineer How to unleash your full potential by integrating the strengths of these two seemingly contrasting professions Problem solving is the key to success in both engineering and business. If you are either an entrepreneur looking for a unique approach to business or an engineer searching for a way to advance your career, this book is for you.
Taking a learn-by-doing approach, Software Engineering Design: Theory and Practice uses examples, review questions, chapter exercises, and case study assignments to provide students and practitioners with the understanding required to design complex software systems. Explaining the concepts that are immediately relevant to software designers, it begins with a review of software design fundamentals. The text presents a formal top-down design process that consists of several design activities with varied levels of detail, including the macro-, micro-, and construction-design levels. As part of the top-down approach, it provides in-depth coverage of applied architectural, creational, structural, and behavioral design patterns. For each design issue covered, it includes a step-by-step breakdown of the execution of the design solution, along with an evaluation, discussion, and justification for using that particular solution. The book outlines industry-proven software design practices for leading large-scale software design efforts, developing reusable and high-quality software systems, and producing technical and customer-driven design documentation. It also: Offers one-stop guidance for mastering the Software Design & Construction sections of the official Software Engineering Body of Knowledge (SWEBOK®) Details a collection of standards and guidelines for structuring high-quality code Describes techniques for analyzing and evaluating the quality of software designs Collectively, the text supplies comprehensive coverage of the software design concepts students will need to succeed as professional design leaders. The section on engineering leadership for software designers covers the necessary ethical and leadership skills required of software developers in the public domain. The section on creating software design documents (SDD) familiarizes students with the software design notations, structural descriptions, and behavioral models required for SDDs. Course notes, exercises with answers, online resources, and an instructor’s manual are available upon qualified course adoption. Instructors can contact the author about these resources via the author's website: http://softwareengineeringdesign.com/
Effective design and manufacturing, both of which are necessary to produce high-quality products, are closely related. However, effective design is a prerequisite for effective manufacturing. This new book explores the status of engineering design practice, education, and research in the United States and recommends ways to improve design to increase U.S. industry's competitiveness in world markets.
